1. TU-A Timing TemperingTire Vulcanizing Machine

Voltage: 220V

Power: 420W×2

Repair Range: motor cars' and minibuses' vacuum tires

TU-A timing tempering tire vulcanizing machine has a pre-set temperature whose figure can be adjusted. The temperature adjuster is located near the sandbag with a numerical display. The maximal repairing area can reach 80×70 ㎜². If operating for 10 hours in a row, it only consumes 1-2 kilowatt-hours of energy. It is both economical and convenient to use. When the inner tube is being repaired the lower surface is heated with a temperature of 140-150 ℃. If it is for the outer tube, either the upper surface or the lower or both are heated with a temperature of 160-170 ℃. Turn on the switch on the upper surface or the lower or both and the temperature will rise automatically. The repair duration lasts about 8-10 minutes.

2. TU-D Automatic Constant Temperature Practical Tire Repair Machine

Voltage: 220V

Power: 500W

Automatic Temperature Control: 165±15℃;

Repair Range: all kinds of inner tubes

TU-D automatic constant temperature practical tire repair machine is nimble to use, economical and durable with an automatic temperature control system. It can complete the tire repair under the automatic temperature control conditions to achieve the best smoothness effect.

3. TU-1 Automatic Timing Temperature Tire Repair Machine

Voltage: 220V

Power: 500W

Automatic Temperature Control: 165±15℃

Vulcanization Time: ≤7 minutes

Repair Range: all kinds of inner tubes

TU-1 automatic timing temperature tire repair machine is nimble to use, economical and durable with an automatic temperature control system.

4. TU-2 Pointer Medium Tire Vulcanizer

Voltage: 220V

Power: 420W×2

Repair Range: motor cars' and minibuses' vacuum tires

TU-2 pointer medium tire vulcanizer has a pre-set temperature whose figure can be adjusted. The temperature adjuster is located near the sandbag with a numerical display. The maximal repairing area can reach 80×70 ㎜². If operating for 10 hours in a row, it only consumes 1-2 kw/h of energy. It is both economical and convenient to use. When the inner tube is being repaired the lower surface is heated with a temperature of 140-150 ℃. If it is for the outer tube, either the upper surface or the lower or both are heated with a temperature of 160-170 ℃. Turn on the switch on the upper surface or the lower or both and the temperature will rise automatically. The repair duration lasts about 8-10 minutes.

5. TU-3 Car Tire Vulcanizer

Voltage: 220V

Power: 500W

Automatic Temperature Control: 165±15℃;

Repair Range: small outer tubes

TU-3 car tire vulcanizer is nimble to use, economical and durable with an automatic control system and a manual adjustment. It can complete the tire repair under the automatic temperature control conditions to achieve the best smoothness effect. The six aluminum films with clamps can be covered over the heating heads according to the different positions of the repairing areas (say the tire cushion, the tire head or the tire side).

6. TU-Z Tilting Tire Vulcanizing Machine

Voltage: 220V

Power: 500W×2

Automatic Temperature Control: 165±15℃

The Time Range: ≤120minutes

Repair Range: outer tubes of small cars

TU-Z tilting tire vulcanizing machine nimble to use, economical and durable with an automatic control system, a 120-minute heating and a turning angle of 90°. The six aluminum films with clamps can be covered over the heating heads according to the different positions of the repairing areas (say the tire cushion, the tire head or the tire side).

7. TU-5 Vertical 6 Moulds Temperature Tire Repair Machine

Voltage: 220V

Power: 500W×2

Automatic Temperature Control: 165±15℃

The Time Range: ≤180mins

Repair Range: small outer tubes

TU-5 vertical 6 moulds temperature tire repair machine is durable with an automatic temperature control system, a 180-minute heating and an alarm warning. It can complete the tire repair under the automatic temperature control conditions to achieve the best smoothness effect. The six aluminum films with clamps can be covered over the heating heads according to the different positions of the repairing areas (say the tire cushion, the tire head or the tire side).

8. TU-G Large Tire Vulcanizer

Voltage: 220V

Current: 20A

Total Power: 4.5KW

Insulation Testing: ≥20MΩ

Control Temperature Range: 0~200℃

Shape Dimension: 12000×1000×780mm

Weight: 280kg

TU-G large tire vulcanizer ia applicable to tires above 650-16 or below 1200-20. All engineering and mechanical tires with a breadth less than 360mm can be vulcanized. It is highly efficient, energy-saving, safe and environmentally friendly with a constant temperature and an automatic control system. Tires vulcanized by this machine do not experience aging or deformation. Explosive holes, large or small, to any part of the tire can be vulcanized. The vulcanization's quality is guaranteed to make the repaired tires function normally.

We are professional manufacturer and supplier of tire vulcanizer in China. We offer a variety of manufacture timing tempering tire vulcanizing machine, automatic constant temperature practical tire repair machine, tilting tire vulcanizing machine, and large tire vulcanizer. We possess over 20 years' experience of producing, selling and serving. Our company's products have been exported to Sweden,United States, Canada, Venezuela,Russia, Czech,Belgium, Brazil, Netherlands,Finland, South Africa, New Zealand, Thailand,Egypt, Georgia, Myanmar,Panama, Moldova, and Australia. Each month, nearly 40 cabinets of products are exported to different countries in the world. And we offer OEM service. If you need tire vulcanizer, please contact us and we hope you can visit our factories by yourselves.